Water is life
Remote monitoring and control retrofits to the irrigation system you already run.
Position, angle, speed, pressure and alarms from every pivot while it moves. Retrofits to different pivot types, with no new machine.
The same retrofit approach along a linear run: movement, speed, pressure and a stop alarm the moment something goes wrong.
For orchards, vineyards and greenhouses. Pressure, flow and tank levels across your lines, so a blocked or burst section shows up as data, not as a dry row.
Where the savings come from
An irrigation system is a big investment that runs day and night.
Fewer trips to the field
Alarms for motion, stoppages and power outages reach you directly. With several pivots running at once, you know which one needs attention and why, before you get out there.
Water at the rate you set
Accurate irrigation statistics per machine help operators adjust each pivot to the m³/ha rate they want, instead of estimating from the panel.
Control of speed and fertigation
Relay outputs and analogue inputs let you set pivot speed and fertigation rates remotely, where your controller allows it. We confirm what’s possible for your equipment before any project starts.
Built for machines that don't stop
One of our pivot monitoring projects has been running since 2020, working night and day, all year round.
What we measure
Start with the machines, then add the sensors that matter for your crop and your water source.
Machine position and movement
Direction, GPS position, current angle and rotation speed, reported while the system runs. It stops reporting when the system is idle.
Pressure
Water pressure on the machine and in the supply line, with alarms when it drops or spikes.
Reservoir and tank level
Levels in reservoirs, ponds and tanks reported remotely, including fertiliser tanks.
Weather and soil
Wind, rain, temperature, humidity, solar radiation and soil moisture, to decide when to irrigate at all.
Your existing controls
4–20 mA and 0–5 V inputs plus relay outputs connect to the equipment you already have, including safety events and alarms.
What operators ask
From family-run pivots to large fruit estates, desert projects to greenhouse ranges: irrigation looks different everywhere.
Will it work on our machines?
The hardware retrofits to different types of pivot and linear systems. Tell us the make, model and controller, and we’ll tell you what we can read and what we can control.
Will it work where we are?
Yes. Our devices connect worldwide, using different mobile operators depending on the country, with no local gateway to install. Tell us where your fields are and we’ll set up the best connection for each site.
Can we control fertigation remotely?
Where your controller allows it, yes: speed and fertigation rates through relay outputs. Where it doesn’t, you still get the data and alarms, and control stays at the panel.
Where does the data go?
Into the findy IoT platform for real-time monitoring and alarms, and on to third-party applications if you already use farm management software.
Who are we dealing with?
One team in Sofia builds the hardware, firmware, connectivity and device platform. The engineer you talk to works with the people who built the device.
How do we start?
Tell us about your system: how many machines, what type, where. An engineer will come back with what makes sense to measure first.
Further reading
Field notes from our work on irrigation.
Start a conversation
Tell us what you irrigate and what you’d like to stop doing by hand. Our engineers have the tools for the job.
By sending this form you agree to our privacy policy.