GPS Tracker Pro

Compact device with long-lasting battery and industrial design.

This GPS tracker can stay in standby mode for up to 6 months or to transmit GPS locations for up to 120 hours.

Sustainable 2G GPRS network usage used also for approximate positioning, when there is no GPS coverage.

How it works?

The device is in standby mode by default.
In this mode when a user requests a report through the mobile application or the server, the server sends an SMS command which wakes up the device.
Based on the requested report, the tracker starts searching for GPS signal and coordinates and sends back information about its GPS or GSM position and battery level.
When the device is in SECURITY mode and there is a movement or a vibration, the built-in motion sensor wakes up the device, starts a LIVE tracking and sends an ALARM report to the server. The server sends a PUSH notification to the owner’s mobile application and records the GPS positions (if any) for the next 10 minutes and then goes back in its current mode.
If the movement continues after the first 10 minutes, the whole cycle is repeated.

FindyIoT - Image - GPS Tracker Pro

Specifications

Small-size advantage

Dimensions

71 x 48 x 35 mm

Weight

Weight

140 g

Better Safety

IP Protection

IP 32

Temperature range

Temperature range

-20 +40

SIM

SIM

Embedded SIM / MicroSIM

Firmware over the air

Firmware over the air

Yes

Wi-Fi

Wi-fi

Protocols 802.11 b/g/n (802.11n up to 150 Mbps) A-MPDU and A-MSDU aggregation and 0.4 μs guard interval support Frequency range - 2.4 GHz ~ 2.5 GHz

Bluetooth Low Energy (BLE)

Bluetooth

Bluetooth v4.2 BR/EDR and BLE specification NZIF receiver with -97 dBm sensitivity Class-1, class-2 and class-3 transmitter

Related Use Cases

GPS Tracker Pro

Key Benefits

  • Great battery life in standby mode and LIVE tracking;
  • Customizable configuration for even longer battery lifetime;
  • Compact size;
  • Motion sensor with alarm reports and PUSH notifications;
  • Strong GPS antenna for accurate positioning;
  • Wi-Fi module for indoors positioning;
  • In-house algorithm for GSM cells positioning, when there is no GPS coverage;
  • micro USB port for recharging.

Additional Information

Processor

Two low-power Xtensa® 32-bit LX6 microprocessors
448 KBytes ROM for booting and core functions
520 KBytes on-chip SRAM
8 KBytes SRAM in RTC SLOW
8 KBytes SRAM in RTC FAST
1 Kbit of EFUSE, 256 bits MAC
Interfaces: SD-card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S , IR, GPIO, capacitive touch sensor, ADC, DAC, Hall sensor, temperature sensor

Radio technologies – 2G, NB-IoT

2G + NB-IoT + LTE-Cat M1

Supported bands

Cat-M B1/B2/B3/B4/B5/B8/B12/B13/ B14/B18/B19/B20/B25/B26/ B27/B28/B66/B85
Cat-M(Kbps) 589(DL)/1119(UL)
Cat-NB B1/B2/B3/B4/B5/B8/B12/B13/ B18/B19/B20/B25/B26/B28/ B66/B71/B85
Cat-NB(Kbps) 127(DL)/158.5(UL)
GSM 850/900/1800/1900MHz
EGPRS(Kbps) 296(DL)/236.8(UL)

Types of positioning – GSM/GNSS/GPS

GNSS engine (GPS, GLONASS, BDS and Galileo)

Power options

Battery:

Li-Ion; 2 X MR18650 -26H; 3,6V; 2,6Ah = 5,2Ah

External Power supply:

5V DC, micro USB 500mA

Number of reports with one battery

Work mode: Always Standby
– Battery Life = 4m 13d
– Iterations = 130

Work mode: 1 report/24h
– Battery Life = 1y 10m
– Iterations = 669

Energy consumption

Work mode: Always Standby
– Report = 52.8 mA
– Sleep = 1.6 mA

Work mode: 1 report/24h
– Work = 23.6 mA
– Deep Sleep =0.234 mA

Extenal power supply energy consumption

up to 650mA

Supported settings

Different work modes:
– Work
– Sleep
– Standby
– Security
– Reports: GPS, GSM, Wi-Fi position, Battery level, ALARM on movement

Additional sensors

Tilt sensor
Digital input
Analog input
Magnet sensor

External inputs

Motion sensor

Outputs

No

Others

No

Applications

Asset tracking
Equipment tracking
Vehicle tracking
Cargo tracking
Personal use

Feel the force!

Still have questions? Let our engineers offer you quality technology consulting services.

Inquiry

Make an inquiry for this product.